03-09-2008 05:39 AM - edited 03-17-2019 09:18 PM
Hi All
what is the prcedure to upgrade cme 3.1 to cme4.1
03-09-2008 10:03 AM
Hi Thejas,
The required steps are nicely listed in this doc;
Installing and Upgrading Cisco Unified CME Software
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00808777e0.html
This thread has a nice note from Paolo!
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1dde8b54/2#selected_message
Why don't you start by upgrading IOS to 12.4(11)XJ4, for CME 4.1. This seems to be a highly rated and stable IOS/CME combination.
12.4(11)XW2 - CME 4.2
12.4(15)T - CME 4.1
12.4(11)XJ - CME 4.1
From this doc;
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm
Hope this helps!
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community