08-08-2017 07:05 PM - edited 03-18-2019 01:23 PM
Hi Everybody,
By following the guide (section 3: Setting up scheduled and rendezvous calls)
https://www.cisco.com/c/dam/en/us/td/docs/conferencing/ciscoMeetingServer/Deployment_Guide/Version-2-2/Cisco-Meeting-Server-2-2-Deployments-with-CUCM.pdf
Version
CUCM 11.5
CMS1000 2.2.5
SX20 ce 8.3.2
mx800 ce 8.3.2
Cisco TelePresence DX70 ce 8.3.2
The endpoints are all updated to ce 8.3.2
I created the rendezvous call with non-secure SIP trunk, with number based routing. (i.e. Route pattern)
Problem
When dial to 440100 (CMS1000), voice conference is fine. However, there is no video come up
Anybody could help ?
Thanks in advance
Sam
08-08-2017 10:41 PM
can you check in the logs whether the SDP negiotations for the Video is happening or not?
also check the CMS logs for more details or please share the CMS logs.
08-09-2017 09:39 PM
Thanks for the reply, just tried to remove the MTP required on sip trunk, then the call is fine now
Thank you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide