cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
353
Views
1
Helpful
1
Replies

Codec plus and HDMI passthrough / Call from laptop

Lars01
Level 1
Level 1

Hey

At work we have a Cisco Codec Plus and a Quad camera.

We mostly use MS Teams, and then I saw this video online:

https://www.youtube.com/watch?v=x5DQLGZ1oBs&t=686s

An admin can enable the function, connect a HDMI to a INOGINI device and audio from the Codec Plus HDMI output 2 + jack output and use it with your laptop.

I was wondering if you can add a features to the "Call from laptop" page:

Lars01_0-1713118672137.png

 

Is it possible to add functions to this page?

What I'm looking for is three buttons. A button called "1", a button called "2" and a button called "3":

Lars01_2-1713118867577.png

These buttons would control what comes out of the HDMI output 2 on the Codec Plus.

When you pres button "1" input 1 on the Codec will go out of output 2 on the Codec Plus.

When you pres button "2" input 2 on the Codec will go out of output 2 on the Codec Plus.

When you pres button "3" input 3 on the Codec will go out of output 2 on the Codec Plus.

 

Is this possible with this "switcher function"?

Perhaps with macros?

 

Best regards

Lars

 

1 Reply 1

Wayne DeNardi
VIP Alumni
VIP Alumni

The functionality above is implemented with the Macros and Room customisation - so it should be relatively easy to add your own buttons and functionality to it by editing what is provided.

Wayne

Please remember to mark helpful responses and to set your question as answered if appropriate.