02-13-2023 11:12 PM
I am running CMS version 3.3 and trying to get WEBAPP working.
One thing I noticed reading the Configurating WEB APP CISCO guide is last page when I need to WEB into the CMS.
I go to Configuratio > General page.
I don't have the "External Access" Web Bridge URI window under the IVR inforamtion ?
I have the WEBBridge3 certs successfully installed I also have the c2w path correct in the API set.
Solved! Go to Solution.
02-13-2023 11:19 PM
Hi,
everything is done via API.
- You need a new webbridge object, where you put the c2w url (which points to the webbridge component in CMS)
- Add a new empty webbridge profile
- In the new webbridge profile, add a new webBridgeAdress with the parameter "address" set to the meeting url (e.g. https://meeting.cisco.com)
- In the webbridge object, assign the webbridge profile
02-13-2023 11:19 PM
Hi,
everything is done via API.
- You need a new webbridge object, where you put the c2w url (which points to the webbridge component in CMS)
- Add a new empty webbridge profile
- In the new webbridge profile, add a new webBridgeAdress with the parameter "address" set to the meeting url (e.g. https://meeting.cisco.com)
- In the webbridge object, assign the webbridge profile
02-13-2023 11:39 PM
I am working off this document :
Only indicates configuring the webbridges object ? I entered c2w://bhrncms01.mcw.ad.usmc.smil.mil:9999 for the URL.
02-13-2023 11:49 PM - edited 02-14-2023 12:00 AM
But the first sentence says, for which version this doc applies:
How do expect it to be the same config then for a different version? You wrote, you have 3.3.
A lot has changed about how to configure CMS, especially in the last 2.9.x and first 3.x versions.
02-13-2023 11:59 PM - edited 02-14-2023 12:02 AM
When I was on the cisco site I only saw configure webbridge3 for version 3.0 so I assume it was good for version 3.3 ?
Do you have a link for the doc for version 3.3 ?
02-14-2023 12:08 AM
There aren't always config example or tech notes available for every version.
I don't have such a doc either, but you can always refer to the depyloment guide. There is one for every version.
02-14-2023 03:31 AM
Got it figured out ... thank you ...
Key was to make sure the certs were good and the fqdn was entered correctly
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide