cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
525
Views
0
Helpful
3
Replies

CTS 3010 showing admin password expiration

t.gupta
Level 1
Level 1

Hi Team

we have CTS 3010 system and while logging to the system via ssh found some days left for expiration.We had checked the setting from the CUCM side and found the admin password life to be zero.We even restarted the system the system twice after making the admin password life to be Zero still we have the same problem

Could you please help me in this

Regards

Tarun

3 Replies 3

Dharmesh Nandoria
Cisco Employee
Cisco Employee

Hi Tarun,

Please execute following commnad and see it help.

set upgrade firmware

utils system restart force

Kind regards,

Dharmmesh

Hi Dharmesh,

We had executed the above commands send by you still the problem is same.Please let me know what needs to do now.

Regards

Tarun Gupta

Hi Tarun,

I can see it's a very old post but I found it while searching the solution for a similar issue I faced recently with one of the CTS device ( was not using the default credentials).

Did you manage to sort this out ??

It looks like if we change the password from default to some other values, then we get this problem as I never see this warning for any CTS's set on default credentials. In my case, I revert the credentials to default which removed the warning message but on CUCM, the password life is set to 60 for all CTS's which I believe is again default value.

But still, if there is any other inputs, please let me know.

Cheers

Anjali