CUCM 8.6 Direct Integration with VCS Expressway

[Denis Lysenko]

There is one article on community about this topic.

Someone try to integrate CUCM 8.6 with VCS Expressway for direct video calls from Jabber for Windows? or calls from Cisco Codec such as EX60 or C40 registred on VCS-e?

Please get advice about this integration.

[Oleksandr Yurchenko]

Hi Denis

Deployment guide will help you.

http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Cisco_Unified_Communications_Manager_Deployment_Guide_CUCM_8_9_and_X7-2.pdf

The recommended design would be as follows CUCM>VCS Control>VCS Expressway

br Oleksandr