cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
653
Views
0
Helpful
3
Replies

CUCME to CUCME video over WAN

ruttersean
Level 1
Level 1

Hello, looking for some trouble shooting pointers.

I have 3 routers all running CUCME7 and all running video. I can place a video call between two CIPC phones on the same router no problem no matter which router I choose.

I cannot however sucessfully place a video call between two routers. The call is set up and the audio side is fine but there is no remote video on either phone.

I can configure two cipc phones to connect to a remote router in Belgium or Germany from the UK and sucessfully place a video call so video is being passed across the WAN.

I can also place a video call from cipc over vpn to another cipc on the same cme router no problem. The issue only occurs cme to cme.

Any pointers much appreciated.

Thanks

Sean

1 Accepted Solution

Accepted Solutions

Hi Sean,

What type of connection do you have between your two CME routers? If you are using SIP you should be on 12.4(22)YB or 12.4(24)T.

-nick

View solution in original post