default call protocol conference

[mohammadfayek19]

the default call protocol set to SIP, but system is not registered the system may not be able to make any calls. Please either change the default call protocol, verify that the sip protocol is enabled or configure sip or H323.

[Dorothy1]

Thanks for sharing this information. Cuyahoga County Auditor

[Roger Kallberg]

Not clear on what your question is, it looks like your "just" posting the output from a system. The output as such is IMHO pretty straightforward, it basically says that the device cannot reach the SIP system. Have you verified that it has connectivity to the set SIP system?