02-24-2015 04:39 AM - edited 03-18-2019 04:04 AM
Hi All,
there is a problem i am trying to register DX80 with CUCM 10.0, i have uploaded the COP file for DX80 but still i am unable to see DX80 in the device list.how can i register cisco DX80 with cucm.
02-24-2015 03:26 PM
Did you reboot the cluster after the install?
02-24-2015 10:34 PM
Hi George,
I dont have any cluster i have stand alone CUCM, i have restarted TFTP service and Call manager it self but it does not show any device named DX80
02-25-2015 07:26 AM
02-24-2015 03:51 PM
You already asked this in other thread
https://supportforums.cisco.com/discussion/12260371/how-add-dx80-and-dx-650-cucm-10x
02-24-2015 10:35 PM
Hi jamie,
Yes i have asked this question on another thread as well
04-09-2015 05:15 AM
Hi Muazam
you can check this page:
https://supportforums.cisco.com/discussion/12374256/adding-dx80-cucm-91
download the device pack of CUCM 9.1.2 it will be included in.
cmterm-devicepack9.1.2.12039-1.cop
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide