Hi,
According to cisco DX series Administration guide the video stream will be transmitted as non secure and even if the both devices are secure, the encrypted lock icon is not displayed for video calls.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/dx/series/admin/1022/DX00_BK_C9FCBAE4_00_cisco-dx-series-ag1022/DX00_BK_C9FCBAE4_00_cisco-dx-series-ag1022_chapter_01000.html#DX00_RF_SD9F71AB_00
Can some one confirm that ?
I tested a call between cisco Jabber (on CUCM)and DX80 (on CUCM), the call was established and only the audio is secure (verified by traces) and there is no lock icons during the call. When the video is disabled betweeen the 2 devices and only audio permitted => call is established and the lock icon is displayed.
However the lock icon is displayed during a video call between a VCS registred endpoint and athe DX80 (on CUCM). Is there any explanation for such behaviour
thx
