We have just loaded TC6.1.0 on to a couple of our EX90s to do some testing.
When we connect (H.323) to one of our Polycom VSX7000 endpoints (running the latest firmware 9.0.6.2-103) we get no audio on our EX90.
Interesting thing is, if we put the EX90 in to Diagnostics Mode (Settings/Diagnostics/On) and do the exact same dial, we do get audio.
Both endpoints are on the same subnet, connected to the same VCS-C. Downgrading the EX90 back to TC6.0.1 or 5.1.7 resolves the issue as well.
Does anyone else have the same issue, or know of a simple fix?
Wayne
Please remember to mark helpful responses and to set your question as answered if appropriate.