ā07-25-2013 01:02 PM - edited ā03-18-2019 01:31 AM
We have the standard touchscreen CTS-CTRL-DV8= with our Cisco EX90's. We have a few instances where we actually need a longer cable between the touchscreen and the EX90. Are there any available, or any other options to extend this?
Solved! Go to Solution.
ā07-25-2013 10:22 PM
Hi,
you may find few threads already closed on this, yes you have the option to increase the length however
the Handset will not work : limitation
two option : a c series toouch panel which is longer than ex90 touch
or install a POE adapter PSU-DVC-POE13V= and connect the same EX90 touch on the network (pair) .
same can be done for the C series touchCTS-CTRL-DVC8=
refer to the threads below:
https://supportforums.cisco.com/thread/2179316
https://supportforums.cisco.com/thread/2098588
Regards
Ravi Kr.
ā07-25-2013 10:22 PM
Hi,
you may find few threads already closed on this, yes you have the option to increase the length however
the Handset will not work : limitation
two option : a c series toouch panel which is longer than ex90 touch
or install a POE adapter PSU-DVC-POE13V= and connect the same EX90 touch on the network (pair) .
same can be done for the C series touchCTS-CTRL-DVC8=
refer to the threads below:
https://supportforums.cisco.com/thread/2179316
https://supportforums.cisco.com/thread/2098588
Regards
Ravi Kr.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide