08-21-2015 01:05 AM - edited 03-18-2019 04:53 AM
Hi all,
I had configured expressway c+e and traversal zone show up on C and E.
But the event log show me an error per minute and jabber can't log in.
Anyone knows what the error mean?
-----------------------------------------------------------------------------------------------------------------
2015-08-21T15:36:38+08:00 | sshdpfwd[12233]: error: mm_request_receive: socket closed |
2015-08-21T15:36:38+08:00 | sshdpfwd[12235]: Event="sshd" Module="openssh" Level="INFO" Detail="Disconnected from 200.20.30.93" UTCTime="2015-08-21 07:36:38" |
2015-08-21T15:36:38+08:00 | sshdpfwd[12235]: Received disconnect from 200.20.30.93: 11: disconnected by user |
2015-08-21T15:36:38+08:00 | sshdpfwd[12233]: Event="sshd" Module="openssh" Level="INFO" Detail="User child is on pid 12235" UTCTime="2015-08-21 07:36:38" |
2015-08-21T15:36:38+08:00 | sshdpfwd[12233]: Event="sshd" Module="openssh" Level="INFO" Detail="Accepted publickey for _pfwd from 200.20.30.93 port 35380 ssh2: RSA+cert SHA256:XkWEN5bLqWjVRYxTTVeAnHYD5B7pEOtrpkhnQfc+AEo" UTCTime="2015-08-21 07:36:38" |
2015-08-21T15:36:38+08:00 | sshdpfwd[12233]: Event="sshd" Module="openssh" Level="INFO" Detail="Authorized by X509(rsa) : CN=expc1.hxipcc.com,OU=HX,O=HX,L=KM,ST=YN,C=CN" UTCTime="2015-08-21 07:36:38" |
2015-08-21T15:36:38+08:00 | sshdpfwd[12233]: Event="sshd" Module="openssh" Level="INFO" Detail="Connection from 200.20.30.93 port 35380 on 10.0.51.99 port 2222" UTCTime="2015-08-21 07:36:38" |
2015-08-21T15:36:38+08:00 | sshdpfwd[12233]: Event="sshd" Module="openssh" Level="INFO" Detail="Set /proc/self/oom_score_adj to 0" UTCTime="2015-08-21 07:36:38"
|
Solved! Go to Solution.
11-24-2015 04:58 AM
It's a cosmetic Bug.
You can see the information in the link below:
CSCuv97323: 8.6 shows "socket closed" error on Exp-E but MRA is successful
08-21-2015 10:50 AM
It's most likely a problem with your cert.
See this page:https://supportforums.cisco.com/discussion/12322476/cucm-105-and-expressway-82-how-can-i-join-rsacert-host-key
Kindly vote or mark question as answered if this helps.
08-25-2015 02:51 AM
Yes, its more than likely going to be an issue with your SSL Certificates.
I would firstly check that you have all the right information in the Expressway-Core and Expressway-Edge certificates, you can find these details in the administrator guide:
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/admin_guide/Cisco-Expressway-Administrator-Guide-X8-6.pdf
Check your DNS, make sure all the hostnames are resolvable OK.
Also ensure that the Expressway servers have the root certificates installed for the CA you are using, both servers need to trust the certificates.
Hope this helps - Si
09-14-2015 05:20 AM
Hi,
I am also facing the same issue. Are you able resolve it?
Thanks,
Vaijanath
10-09-2015 10:34 AM
Did you ever solve this? I have the same issue, but I have no loss in functionality as far as I can tell.
10-23-2015 11:12 PM
a
10-23-2015 11:14 PM
I'm seeing the same socket_closed error, but as Mike said no loss in functionality from what I can see. If anyone has any ideas please share... Mike, you figure anything out?
11-24-2015 04:58 AM
It's a cosmetic Bug.
You can see the information in the link below:
CSCuv97323: 8.6 shows "socket closed" error on Exp-E but MRA is successful
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide