Can I use TCP 5060 for SIP trunk between Conductor and CUCM instead of TLS 5061 (encrypted)? Thanks, Sy
Can I use TCP 5060 for SIP trunk between Conductor and CUCM instead of TLS 5061 (encrypted)? Thanks, Sy
Hello, We have configured Expressway-C/E for B2B calls and it is working fine to dial external domains such as test@webex.com. However, when calling an external domain that contain extension and domain portion (e.g. 222333@xyz.com) from Cisco Jabber...
Hi,I'm using TMS 14.1.1 for schedule meeting, the booking is working properly. But when TMS start the meeting I looked in conference control center it didn't show the active conference in MCU. However if I call directly to MCU, it will show active in...
Hello. How and where could I set up daily backup for : Cisco TelePresence Server (v. 4.0(2.8) Cisco Expressway-C (v. X8.6.1) Cisco TelePresence Conductor (v. XC3.0.3)
Hi everyone, i have a question does the sx80 supports multiple video conferences at the same time, for example if my customer want 2 video conference independent of each other, does the sx80 works fine. also Without CallControl Input video Camera --...
Does anyone have a fix action for the following error when updating an EX90 connected to TMS??? Details: hostaddress: xxx.xxx.xxx.xxx, description: GetDocument Failed. URL: https://xxx.xxx.xxx.xxx/getxml?location=/Status/, base exception: xml not pa...
I have an endpoint running TC7.3.2 provisioned by CUCM 10.5.2. In CUCM, how do I configure the settings on the endpoint for Encryption Mode and Default Call Rate? Can't seem to find them.Thanks, Mike
I'm trying to locate a documet that says what configuration is pushed from CUCM and what is configured locally on the endpoint. We are currently running CUCM 10.0 with SX endpoints TC7.3.4. I have found some things in particular QOS is being pushed...
Hello, I have received a replacement Blade MSE 8510 from Cisco and "DEBUG" mode seems to be enabled but I cannot find how I can disable this feature. Can anybody help? Thanks
Hi FolksWe have a customer that has purchased a SX20 and also a Audio Science Ceiling Mic. I had a 3.5 "4 Pin Cable" made up to extend from the Codec, But when I plug in the Audio Science ceiling Mic , I cannot be heard.Has anyone com across this i...
Hi All, I have cisco TMS and TMSAE both are installed in Same System . I can able to generate a Report Sucessfully but i dont have any Sapmle report to merge the proper tables in Excel If anyone have any Demo or Sample report please share with me I...
Hi We have now several customers, which can only dial an IP address. Is there a way to do a source ip based routing? Example: source ip: 1.1.1.1; dest ip: 10.10.10.10 (VCS-E) --> translated destination: user.a@domain.com source ip: 2.2.2.2; dest ip: ...
Hi Folks, Can you shed some light on this please? H.323 inbound call (dial by IP) -> External F5 -> Fortinet Firewall -> Internal F5 -> Internal Firewall -> VCS-E -> VCS-C -> MCU autoattendent The call drops after 5 mins into the call, every single t...
Hi allI have successfully implemented MRA with version 8.6. It works for our EX, MX, SX Devices. Also the Soft clients are working. For windows, I us a modified .msi file and for the other Soft clients I just used the link:ciscojabber://provision?Ser...
Hello.Got a single Telepresence mx300 without any server in our office.In short time it starts to receive numbers of spam calls- on the internet channel which telepresence uses, there was no firewall whatsoever.So we applied an ACL on vlan in which t...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-08-2024 09:08 AM | ||
07-08-2024 02:12 AM | ||
07-07-2024 01:38 AM | ||
07-04-2024 06:20 AM | ||
06-27-2024 06:47 AM |