Failed to enable TMS provisioning Extension

[Qiyu Bao]

hi, ciscomen!

     just trying use tms provisioning extension for movi register

    Cisco TelePresence Management Suite Provisioning Extension Deployment Guide 

    http://www.cisco.com/en/US/docs/telepresence/infrastructure/tmspe/install_guide/Cisco_TMSPE_Deployment_Guide_1-0_with_14-1.pdf

    after installed TMSPE on tms server , the system got some notes and  alarms and the vcs provisioning mode is "tms anent legacy “mode but

   can not switched to "provisioning" mode

the system log: 

"To enable the VCS to import provisioning data from TMS, the VCS Provisioning Mode must be set to 'Provisioning Extension'.

Configure  the connection settings and the individual services first and when the  status of all the services are OK, the mode can be switched to  'Provisioning Extension'

what should i do??

need your help

[Magnus Ohm]

Hi

You should not configure any of the provisioning extension settings on the VCS, only in TMS. I see that you have enabled TLS communication and enabled certificate validation. Try to turn this off and try again. Once the status is OK you can change the provisioning mode.

/Magnus