How to get back to initial CUCM 7.x/8.x

[zyunpeng]

Hi, experts

After configuring CUCM7.x/8.x, I want to quickly remove all configurations for getting back to initial status. Could you let me know if there is a way to delete some files in the system by administrator or root account? Thanks for any help.

Perry

[Aaron Harrison]

Hi

The only 'quick' way to a blank system would be to restore a backup taken when you first built the CCM from media and before configuring anything.

Once you have made configs; you can manually delete things via the GUI, or rebuild from media.

Even with root access you can't just go in and delete things - for example, 90% of what CCM is about is in the DB, you can't just delete the DB, you need the contents of it from the default build.

Regards

Aaron

Please rate helpful posts..

[zyunpeng]

That is a good way. Thank you for your answer, Aaron.

[Aaron Harrison · Accepted solution]

No problem.

Please rate helpful posts and mark answered questions that you've got a satisfactory response from to help identify useful content in the forums...
https://supportforums.cisco.com/docs/DOC-6212