12-14-2012 04:36 AM - edited 03-18-2019 12:17 AM
Hi,
I have a four sx20 device with PR License.
In this we are planning to buy a MS License in the two of the device.
Some one suggest me and help me , how to install MS license in the Existing Sx20 Device.
Regards
Mohan.J
12-14-2012 04:54 AM
Hi Mohan
You add the MS license same way as you enter the PR lisence .
instructions:
1) Open the codec web interface
2) Click Maintance
3) Click Software Upgrade
4) Enter the key you received into the "Option Key" field.
5) Press add, - if it is sucessfull the codec will prompt for a reboot
6) Accept reebot
7) Place calls, you should now have MS installed.
//Marius
12-14-2012 05:11 AM
You may add option key by using API as well (if you have telnet/ssh or console connection).
After open remote session, execute following commands.
After system startup, execute “xsta system” and look for multisite which you should see “true” like below example (indicate system have enabled MS feature).
=============================================
*s SystemUnit Software OptionKeys MultiSite: "true"
=============================================
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide