07-11-2012 06:09 PM - edited 03-17-2019 11:27 PM
Dear Expert.
I have Licensing question on my following device:
1) I have :
vcsc - 10 Non-traversal Calls License, 100 traversal Calls License
vcse - 5 traversal Calls
If I register the mcu, and endpoint to the vcsc as the h323 gatekeeper.
I should able to have a 15 ( 5 traveral calls and 10 non-traversal calls) sites h323 call conference simultaneously on the MCU ?
Solved! Go to Solution.
07-11-2012 07:40 PM
> If I register the mcu, and endpoint to the vcsc as the h323 gatekeeper.
> I should able to have a 15 ( 5 traversal calls and 10 non-traversal calls) sites h323 call
> conference simultaneously on the MCU ?
Technically VCS-C able to process up to 110 simultaneously call (including call on MCU or point-to-point call without MCU) with your current VCS-C configuration.
For example:
10 x H.323 native calls between MCU and Endpoint
5 x H323/SIP traversal call from Endpoint on external network to MCU via VCS-E
(VCS-C will use traversal call license for handling this call).
3 x IPv4/IPv6 interworking calls
(assume few Endpoints with IPv6 IP assignment calling Endpoint with IPv4 IP address).
which will sum up as 18 simultaneous call on VCS-C.
The interworking call (IPv6/IPv4, SIP/H323, etc.) will consume traversal call license.
07-11-2012 07:46 PM
> If I register my MCU and endpoints to the ISDN gatway as the h323 gatekeeper,
> I should able to make a 18 sites (1 h323 calls and 17*128kbps ISDN calls) call conference simultaneously
> on the MCU?
Embedded GK on TelePresence ISDN Gateway does not have limitation for number of simultaneous call.
Limitation is only for number of registration.
As ISDN Gateway support audio only gateway connection, with single T1 (T1=24B, PRI=23B=D), maximum simultaneous call number is higher than "18" because audio only call only consume 1B channel.
07-11-2012 06:24 PM
I also have a question on MCU and ISDN Gateway.
2) ISDN Codian ISDN GW 3241- 4 PRI port enabel using T1,
25 Registrations
MCU Codian 4520 - Web Conferencing.
If I register my MCU and endpoints to the ISDN gatway as the h323 gatekeeper,
I should able to make a 18 sites (1 h323 calls and 17*128kbps ISDN calls) call conference simultaneously on the
MCU?
Thx for help!
Best Regard
Tung Chan
07-11-2012 07:40 PM
> If I register the mcu, and endpoint to the vcsc as the h323 gatekeeper.
> I should able to have a 15 ( 5 traversal calls and 10 non-traversal calls) sites h323 call
> conference simultaneously on the MCU ?
Technically VCS-C able to process up to 110 simultaneously call (including call on MCU or point-to-point call without MCU) with your current VCS-C configuration.
For example:
10 x H.323 native calls between MCU and Endpoint
5 x H323/SIP traversal call from Endpoint on external network to MCU via VCS-E
(VCS-C will use traversal call license for handling this call).
3 x IPv4/IPv6 interworking calls
(assume few Endpoints with IPv6 IP assignment calling Endpoint with IPv4 IP address).
which will sum up as 18 simultaneous call on VCS-C.
The interworking call (IPv6/IPv4, SIP/H323, etc.) will consume traversal call license.
07-11-2012 07:46 PM
> If I register my MCU and endpoints to the ISDN gatway as the h323 gatekeeper,
> I should able to make a 18 sites (1 h323 calls and 17*128kbps ISDN calls) call conference simultaneously
> on the MCU?
Embedded GK on TelePresence ISDN Gateway does not have limitation for number of simultaneous call.
Limitation is only for number of registration.
As ISDN Gateway support audio only gateway connection, with single T1 (T1=24B, PRI=23B=D), maximum simultaneous call number is higher than "18" because audio only call only consume 1B channel.
07-11-2012 07:57 PM
Thanks Tomonori.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide