LLQ for Video

[vertre]

I used the next URL for VoIP with LLQ http://www.cisco.com/warp/customer/788/voice-qos/voip-ov-fr-qos.html

It works

But I can use the same configuration and add Videoconference Over IP Over Frame Relay link.

[aglowack]

Yes you can use the same configuration, but mark the traffic with IP Prec4, See the example below. The example below is from a test bed on a frame relay link supporting a single 348k video call.

class-map Video-Conf

match access-group 102

!

policy-map QoS-Policy

class Video-Conf

priority 450 30000

class class-default

fair-queue

!

Video-Conf Traffic

access-list 102 permit ip host 10.5.10.100 any dscp af41

[juan-santamaria]

Hi i have polycom terminal and they can mark the traffic with IP PREC4. In the configuration of access list i Can to use

access-list 180 permit ip any any precedence flash-override

for indicate ip prcec traffic. I like to use dcsp but only my VS-4000 support that and my viewstation and iPower it is not support onlyt ip prec