cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
976
Views
5
Helpful
2
Replies

lock down data on a voice network

We have CUCM voice infrastructure and we need to give access to voice network on a remote site where we dont need any data access(no PCs on site only phones).any suggesions for Securing the network?possibly locking it down only for voice

remote site will be connecting through Microwave

Thanks in advance

***Please rate all the useful posts***
-Prabath
2 Accepted Solutions

Accepted Solutions

Ray Watkins
Level 1
Level 1

You can do the following to help with physical security:

disable switchport on the phones

shutdown all ports on the switch not in use by a phone or uplink

You can create an ACL on the router that blocks all traffic on the voice vlan except for RTP and signaling. This will block any traffic that is generated
by the workstation.

View solution in original post

In addition to Mr. Watkins suggestions you might want to consider port security.

View solution in original post

2 Replies 2

Ray Watkins
Level 1
Level 1

You can do the following to help with physical security:

disable switchport on the phones

shutdown all ports on the switch not in use by a phone or uplink

You can create an ACL on the router that blocks all traffic on the voice vlan except for RTP and signaling. This will block any traffic that is generated
by the workstation.

In addition to Mr. Watkins suggestions you might want to consider port security.