cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1530
Views
0
Helpful
4
Replies

multisite license register on sx20

Hi

Please you can indicate if the multisite license on sx20 need register on codec?

Thanks for you help

Jca

Sent from Cisco Technical Support iPad App

1 Accepted Solution

Accepted Solutions

Magnus Ohm
Cisco Employee
Cisco Employee

According to the datasheet multisite is embedded in the sx20.

So i assume you don't have to add this.

/Magnus

Sent from Cisco Technical Support iPhone App

View solution in original post

4 Replies 4

Magnus Ohm
Cisco Employee
Cisco Employee

According to the datasheet multisite is embedded in the sx20.

So i assume you don't have to add this.

/Magnus

Sent from Cisco Technical Support iPhone App

Thanks for you answer

Sent from Cisco Technical Support iPad App

I though you needed to add an option key to enable it?

I have a factory fresh, unused SX20 in the office, so I can check tomorrow

Sent from Cisco Technical Support iPad App

Marius Nedregaard
Cisco Employee
Cisco Employee

Multisite key should be pre-installed on the codec, but this is not always the case. The multisite option-key is as Magnus stated included in the SX20 bundle, but are NOT guaranteed to be installed on the SX20 prior delivery

/Marius