04-20-2012 06:13 AM - edited 03-17-2019 11:05 PM
Hello
I have a sitation where we have telepresence units deployed accross 7 sites. when calls are made between sites, if my region setting is set to g729 between regions, calls will connect Audio Only. when i change my region settings to g711 between regions and try to call again Audio and Video works
is there a setting that i need to turn on in order to successfully make and receive calls between sites on G729 ?
thanks
I have my telepresence units registered to UCM 8.6 and the units are running the latest code
Solved! Go to Solution.
04-20-2012 06:30 AM
Hi Cristobal,
Curently the G.729 is not a supported codec for Mx200 and 300.
Audio standards | • G.711 • G.722 • G.722.1 • 64/128 kbps MPEG4 AAC-LD |
check the link for more information.
http://www.cisco.com/en/US/prod/collateral/ps7060/ps11302/ps11776/data_sheet_c78-669335.html
So in my view its not liking this.
Thanks
Alok
04-20-2012 06:30 AM
Hi Cristobal,
Curently the G.729 is not a supported codec for Mx200 and 300.
Audio standards | • G.711 • G.722 • G.722.1 • 64/128 kbps MPEG4 AAC-LD |
check the link for more information.
http://www.cisco.com/en/US/prod/collateral/ps7060/ps11302/ps11776/data_sheet_c78-669335.html
So in my view its not liking this.
Thanks
Alok
04-20-2012 06:41 AM
great
thank you very much Alok for your reply greately appreciated
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide