12-05-2001 01:54 AM - edited 03-17-2019 07:51 PM
I've a video conferencing application on some hosts inside my network which need to connect to a H323 Gatekeeper outside ( internet )
The internet connection is made via a 1401 router with IOS 12.2.6 .
We tested the configuration with a static nat for one of the internal host.
The connection goes through but at the endpoint our host present itself with its internal IP .
How can we solve the translation problem ?
Thanks
12-10-2001 09:23 AM
Stephano,
I have emailed a document to you describing the use of the Cisco MCM/Proxy to help you with your issue.
Alan
12-10-2001 02:28 PM
12-18-2001 12:43 PM
Could you forward me a copy of that document as well. Thanks. Steve.
12-19-2001 02:17 AM
I would appreciate a copy as well if possible.
I am trying to run video conferencing between 2 Picturetel 970's an the cisco router at each end is running static NAT for the Picturetel address. I have IOS 12.2.6 IP only and it isn't working.
01-07-2002 09:50 PM
Alan,
Could you email me a copy of this document as well?
Thanks
Bryan
01-08-2002 03:14 AM
01-12-2002 08:20 PM
01-13-2002 10:45 PM
Hi, Alan,
I wanna get a copy too. Thks in advance.
01-22-2002 10:06 AM
03-10-2002 08:38 PM
Can I get a copy as well? tdennis@catalysttech.com
Thanks!
01-21-2002 12:42 PM
Alan, could you also email me a copy? Thanks!
01-22-2002 05:27 AM
Hi Alan,
Can you please email me a copy of the document.
Ta
Scott
01-25-2002 04:49 PM
I guess I'll join the club. I am just learning the PIX and they briefly mention NAT and H.323. I would like a copy of that doc as well.
01-29-2002 06:37 PM
I searched Cisco's website for the mentioned document, without success. Can you please email me a copy as well? Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide