08-13-2013 09:24 AM - edited 03-18-2019 01:36 AM
Hello,
We have a issue where NTP has stopped working on our internal VCS Control, we do not have a internal NTP server so we use the public servers:
0.uk.pool.ntp.org, 0.europe.pool.ntp.org etc
These addresses always worked and no matter what public address we try they all fail with the same response as attached, I have also gathered the following output from our SSH session.
Any ideas would be appreciated!
09-05-2013 09:09 AM
check the stratum value. It might bee to high. Try configuring the NTP server which has stratum less than 5 and check. If possible, configure one on LAN and check.
http://www.cisco.com/en/US/tech/tk869/tk769/technologies_white_paper09186a0080117070.shtml#ntparch
Please rate all useful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide