08-22-2013 12:14 AM - edited 03-18-2019 01:40 AM
Hi All,
We are using CUCM for provisioning where as far as I know all users, except admin, must be provisioned manually form the endpoints.
Would it be possible to provision new users via TC6.2 endpoints CLI. Currently we are able to add the users only via Web interface in "Configuration>User Administration>Add new user...".
I went through Administrators guide and API guide and found nothing about it. Can somebody help me?
Regards
Ondrej
Solved! Go to Solution.
08-22-2013 06:00 AM
Hi Ondrej,
At this moment, it is not possile to create users for TC Endpoints out of the web interface. Cisco even has removed the command "adduser" from the root CLI interface as well. So it is really not possible.
If you really need to add users out of the web interface, I would suggest you to raise a feature request. =)
Regards
Paulo Souza
Please rate replies and mark question as "answered" if applicable.
08-22-2013 06:00 AM
Hi Ondrej,
At this moment, it is not possile to create users for TC Endpoints out of the web interface. Cisco even has removed the command "adduser" from the root CLI interface as well. So it is really not possible.
If you really need to add users out of the web interface, I would suggest you to raise a feature request. =)
Regards
Paulo Souza
Please rate replies and mark question as "answered" if applicable.
08-22-2013 06:21 AM
Hi Paulo,
I will raise a feature requests to implement this command back again.
Thanks for you reply.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide