With the Web Interface, or via telnet.ssh, you can change the default call rate on the SX20 to 1024 - that way you will not need to specify it in the phone book, or each time you dial.
In the web interface this can be found under Configuration > Conference > DefaultCall, and set the Rate field to 1024.
Via the command line, you can use the following command:
xConfiguration Conference 1 DefaultCall Rate: 1024
EDIT: Apologies for dragging up an old thread - i didn't notice the sort order on the forums had changed and was showing ancient threads at the top of my list.
Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate
Wayne
Please remember to mark helpful responses and to set your question as answered if appropriate.