Replacement Camera for an old MXP6000

[Curt Dieckelt]

Good Day,

I have a client who has a Tandberg MXP6000, and the camera was damaged and needs to be replaced.

The original replacement camera is now end of life.  Is there a camera Cisco offers that will work with this model?  If so how can someone point me in the right direction on a wiring diagram(I'm assuming it would need to be custom)

Thanks

Curt

[Martin Koch]

Which camera do you have? The old WAVE2 or the Precision HD 720?

Did you check with your Cisco partner if they still might have some? I also did a quick search

on google and at least there are some 3rd party companies selling or repairing older vc cameras.

Bedsides that you could use the 1080p camera

http://www.cisco.com/en/US/prod/collateral/ps7060/ps11307/ps11335/data_sheet_c78-669051.html

But if I recall it right, that needs to be connected via a HDMI(camera) to DVI (codec) cable to get video.

Please remember to rate helpful responses and identify helpful or correct answers.

[Wayne DeNardi]

You can find all the pinouts in the MXP Codecs Physical Interface Guide:

http://www.cisco.com/en/US/docs/telepresence/endpoint/mxp-series/f9/user_guide/mxp_codec3000-6000_physical_interface_guide.pdf