Hello,
I ran a show voice port summary at the router and notice some of the channels uner OPER are listed as none instead of "norm".
IN OUT
PORT CH SIG-TYPE ADMIN OPER STATUS STATUS EC
=============== == ============ ===== ==== ======== ======== ==
0/0/0:23 01 xcc-voice up up none none y
0/0/0:23 02 xcc-voice up up none none y
0/0/0:23 03 xcc-voice up dorm none none y
0/0/0:23 04 xcc-voice up dorm none none y
0/0/0:23 05 xcc-voice up dorm none none y
0/0/0:23 06 xcc-voice up dorm none none y
0/0/0:23 07 xcc-voice up dorm none none y
0/0/0:23 08 xcc-voice up dorm none none y
0/0/0:23 09 xcc-voice up none none none y
0/0/0:23 10 xcc-voice up none none none y
0/0/0:23 11 xcc-voice up none none none y
0/0/0:23 12 xcc-voice up none none none y
0/0/0:23 13 xcc-voice up none none none y
Any information is appreciated
Mark
