If a Telepresence site is indicating a Exchange subscription status error when you schedule a meeting (with multiple sites), will the site in error still receive the invitation when the problem is fixed?
Hello,I have purchased the Video Communication Server (VCS) Starter Pack.I have configured the VCS control on the inside network (behind the firewall). I have opened all traffic on the firewall. A public IP is assigned to the server. I can connect th...
In the Medianet Campus SRND 4.0 (pg 1-32) video is divided into four QoS classes:Broadcast VideoReal-Time InteractiveMultimedia ConferencingMultimedia StreamingWe have a mix of Tandberg and Cisco video conferencing codecs and I'm not sure what QoS cl...
Hello together,I can't find an upgrade path to TC5.X . What happens if I upgrade a System with TC2.1.X. All Service contratcs are valid, but can I directly upgrade, or must I do it in more than one Step?Thanks to all posts.Greetings.
Hi all!Today I have occasionally dropped the PrecisionHD 1080p camera. It back cover went of and ribbon cable has been badly damaged. You can see it in the attached file. Can anyone say me what can be done on this issue? Can I send this to some repai...
I've recently upgraded some E20s from version 3.X to version 4.1, however I don't seem to be able to SCP to the endpoints anymore to upload our corporate wallpaper...Has the procedure for remotely uploading wallpapers changed?
We use meetingplace for our team meetings but it seems that everyone is making a phone call for audio/microphone access to the meetings. Is there a way to attend a meeting and receive audio/mic service online?
I have an unusual issue here.CUCM - 7.1.3VCS - 6X9971 - 9.0C60 - TC4.1.0Call from C60's registered with VCS as H323 endpoints can not call across a SIP trunk to 9971 video phones registered as SIP endpoints on CUCM. Working with TAC and have identifi...
HiI am having trouble establishing a video call between E20 registered to VCS running software version X6.1. I have a E20 and a 9971 registered to CUCM version 8.0.3. When I make a video call, the call gets connected but I dont get any video. I also...
I am using TMS 13.0.1, VCS and VCSE X6.1 and currently have about 150 MOVI clients. I would like to be able to see Ad-hoc calls between 2 MOVI in my TMS conference Control Center. The only way I see a MOVI is when they talk to an H.323 system (eithe...
From a c-series endpoint managed by a local TMS server, if I pick an entry from the "Directory" to dial a call remote endpoint's e.164 was always used instead of its H.323 alias. Is there a way I can reverse the called H.323 selection order, i.e. n...
Hello,I ran a show voice port summary at the router and notice some of the channels uner OPER are listed as none instead of "norm". IN OUTPORT CH SIG-TYPE ADMIN OPER STATUS STATUS EC=...
I'm configuring up a QoS environment following the new Medianet 4.0 SRND. We're using all Tandberg/Cisco video conferenice endpoints and Avaya IP phones.Cisco and Avaya recommend marking their signalling packets differently, such as:Cisco recommenda...
Just about to embark on a pretty simple video deployment for a customer next week and I have a couple questions about the 4501 and also encrypting traffic.8 Quickset C20's at remote locationsVCS Control, 4501 MCU, TMS - installed on common vlan at ce...
I am using TMS 13.0.1, VCS and VCSE X6.1 and MOVi 4.2.I have issues when two MOVI on the same network are in communication together, they use TURN licenses even if there is no NATing.Anyboby else ever encoutered this?
