09-27-2015 11:15 PM - edited 03-18-2019 05:02 AM
Hi,
During an active call, I can only hear the audio, my screen is black, can't see anything. However, the other side has no problem of seeing or hearing me. It is a standalone SX20. Any ideas?
Thanks,
How Yee
09-29-2015 08:40 AM
I would start by verifying self-view on the remote side to make sure the remote camera is functional.
Then check the call status during an active call. look at the total and current packet loss on receive and transmit. Anything over 0.0% indicates some sort of network issue.
Most likely a firewall blocking ports or NAT issue. Are you using SIP or H323? Can you post call status screen shot?
09-29-2015 08:39 PM
99% of the time, one-way video, or one-way audio, is a firewall issue.
There's also a small, but relevant chance that there is a NAT misconfiguration on a standalone endpoint.
Check that you have your NAT settings on the endpoint correctly defined and all the relevant firewall holes for the media are open.
Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate,
Please remember to mark helpful responses and to set your question as answered if appropriate.
09-29-2015 10:11 PM
In addition to what the others have suggested, make sure the SX20 is configured correctly, and the firewall has the relevant ports opened to allow inbound traffic. Most notably the H323 ports are open on the firewall and the SX20 is setup to use static ports and not dynamic (if H323 is being used). You can search the forums for "standalone" and find numerous threads on this topic on how to setup a standalone endpoint and things to check that others might have faced with similar issues.
10-01-2015 06:32 AM
How Yee,
If this is a brand new SX20, I would factory reset it. We are seeing a number of these types of issues with factory shipped codecs lately.
Thanks,
Justin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide