09-25-2014 05:50 PM - edited 03-18-2019 03:27 AM
We are trying to connect a SX20 microphone port to the output of a Polycom soundstructure C12.
I'm wondering if anybody has been successful doing this?
It looks like the SX20 has to be tricked to believe its microphone is connected.
Maybe by sending some power on some pins?
I've seen several example on how to connect powered mics directly to the SX20 but the soundstructure output port is different and the codec keep the port shut when plugging it in.
Has anybody been able to connect a soundstructure or similar device to a SX20?
Thanks
10-30-2014 09:13 AM
On the SX20 under
Settings->Administrator Settings->Advanced Config->Audio->Input->HDM1->Mode Off
11-06-2014 03:26 PM
Boris-
Is this still working after recently released software updates from Cisco for the SX?
11-06-2014 04:14 PM
We are running TC7.2.1 and it is still working fine.
If you look under Audio Input Level on the SX20, the Mic is reported as Disconnected for us.
Don't use this as a way to tell if your Mic is working or not.
11-06-2014 04:25 PM
Thanks, I will pass it along to our folks.
11-06-2014 04:40 PM
Wow. So you are saying that even though the sx20 microphone level shows as disconnected, audio is passing? How can I confirm this without a second codec? I need to hook up a biamp nexia real soon.
Thanks.
11-06-2014 05:22 PM
We use BlueJeans
Dial 199.48.152.152 or bjn.vc (enter meeting ID 111# and # when prompted). You'll see a parrot. Talk to him, and he'll repeat.
The voice is distorted to sound like a parrot I guess. But that will confirm that your Mic is able to transmit.
11-06-2014 05:38 PM
Thank you. Can't wait to try it!
11-07-2014 06:48 AM
or 111@bjn.vc puts you directly in to the conference.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide