About borisdecout

borisdecout · 09-25-2014

We are trying to connect a SX20 microphone port to the output of a Polycom soundstructure C12.I'm wondering if anybody has been successful doing this?It looks like the SX20 has to be tricked to believe its microphone is connected.Maybe by sending som...

borisdecout · 03-26-2013

We have two 5525-x setup for active/passive failover.We would like to add IPS to the cluster.My vendor and I have contacted different person at Cisco and got different answers so I hope someone can add more information.The question is "how many licen...

borisdecout · 05-22-2012

I'm attempting to configure two ASA 5520 for active/standby failover.When I enter the “failover” command to enable the config on the primary ASA, the entire routing table disappears.There is no routing process running, only static routes are configur...

borisdecout · 08-16-2011

We are currently testing microsoft DirectAccess and I'm trying to replicate its dynamic remote access using anyconnect 3.0.Is there a way for anyconnect to automatically establish the VPN connection without having the user to be prompted for a user a...

borisdecout · 07-07-2011

We have just upgraded CUCM from 6.1.3 to 7.1.5. and our 2821 gateway from 12.4.21 to 12.4.25eRightfax 9.4 FP1 SR4 was working fine before the upgrade.Now we can't hear the fax tone when calling the server.We see the call being picked up and rightfax ...

borisdecout · 11-06-2014

We use BlueJeansDial 199.48.152.152 or bjn.vc (enter meeting ID 111# and # when prompted). You'll see a parrot. Talk to him, and he'll repeat.The voice is distorted to sound like a parrot I guess. But that will confirm that your Mic is able to transm...

borisdecout · 11-06-2014

We are running TC7.2.1 and it is still working fine. If you look under Audio Input Level on the SX20, the Mic is reported as Disconnected for us.Don't use this as a way to tell if your Mic is working or not.

borisdecout · 10-30-2014

On the SX20 underSettings->Administrator Settings->Advanced Config->Audio->Input->HDM1->Mode Off

borisdecout · 10-16-2014

We finally got it to work by turning off HDMI audio.

borisdecout · 09-26-2014

The audio output of the codec is not disabled, only the mic port is.What we are trying to do is connect third party ceiling mics.The Ceiling mics are connected to the soundstructure C12 and the C12 output port connected to the SX20.We have no issues ...

Member Since	‎06-20-2002 02:23 PM
Date Last Visited	‎03-13-2020 02:22 AM
Posts	126
Total Helpful Votes Received	23

User Statistics

User Activity

SX20 third party mics and Polycom soundstructure c-series

IPS Licencing for active/passive cluster

activating failover config drops routing table

Anyconnect automatic connection

RightFax 9.4 - no fax tone after CUCM upgrade

We use BlueJeansDial 199.48

We are running TC7.2.1 and it

On the SX20 underSettings-

We finally got it to work by

The audio output of the codec