TMS phonebooks for endpoints registered on CUCM via MRA?

[gfolens]

I'm planning to deploy a number of endpoints via MRA and register them on CUCM v10.5(2).

I want these endpoints to use TMS instead of UDS which can be adjusted on the CUCM.

Do I need to open additional ports on the FW's to allow the endpoints to access the TMS phonebooks?

Is it also required to reserve a public IP for the TMS server which is NATted to LAN IP?

rgds, Geert.

[gfolens]

Apparently not supported yet on TMS - release notes TMS v15:

Collaboration Edge:
Cisco TMS does not currently support devices that are behind Collaboration Edge.

[MBO46]

Any news about this support ? 

Best regards,

Matthieu

[Patrick Sparkman]

Still not supported as of TMS 15.3  You should contact your Account Manager, they should be able to tell you what the status is with TMS and MRA.

[Emad Wahba]

Any news on when this feature will be supported.  

We're in the process of converting our DX70 & 80 end points to CE8.3.1 , and the main attraction was the long awaited integration with the TMS.  We have several of these units running in MRA via Expressway.

Thank you

[Patrick Sparkman]

No idea, should reach out to your Account Manager, they can contact someone and possibly get you some information as to a timeline.

[Martin Koch]

The question might be if you need the official support, or just want to get it working.

Some time ago I did some tests, the web requests, incl. the phonebook access get

proxied, also by the MRA registered endpoint. 

At least for a EX90 and even a quite old TMS (13.x) it worked ok for me.

So with the right proxy setup you can get it working. 

[MBO46]

Hi Martin,

Thanks for your answer, 

I can first try to get it working, have you any screenshot of your configuration please ? :)

Thanks

[Chad Pfeffer]

I'm also interested to know the specifics of configuration so if either of you have anything to share, it would be appreciated.  Thanks.