How many video ports does M410V support , i have multiparty license
How many video ports does M410V support , i have multiparty license
Hi Team I need some help badly. We are deploying an MX700 dual screen system at a client site, using clock audio crm-100-rf microphones. The mics work fine, but the issue is when the mics are set to the on position, the system mutes them. when set...
issue with Jabber movi (4.8.12) vs MAC Sierra 10.12.2 register issue to VCS Expressway.
Hi guys, Is there a way to see the user activity in TMS? We've about 3000 users created (that use Cisco Jabber Video) and need to delete the inactive users. I'm trying in TMS and googling, without success. Thanks. Regards.
have a customer that has a new MX300 G2 that has the MultiParty license so that it should be able to start a 3 or 4 party Video Call. It is registered and provisioned on CUCM 11.0. Customer is saying that he can not make a multiparty call. I am thi...
Folks, I'm pretty sure I was reading something about software compatibility issues between the newer ce software for the MX300G2 and some newer TMS versions. What I have is the newer G2 but not so new TMS. I've gotten as far as registering the unit ...
Hi everyone, From what I can tell there is no longer a need for screen licenses, rather PMP or SMP licenses. I just wanted to verify something regarding this endpoint licensing: If I have a room-endpoint (SX/MX), I need to buy a SMP license. If I w...
found an old post but nothing is working I can not find the test IP address for the video conferencing system. all Tandberg IP address is no longer functional seeking a two way video and audio and callback for MXP telepresence Tandberg
What is the part number for Power Cube for P60 Camera, as It will not power up if I only connect it to SX80 Codec LAN port ?
i have cisco sx80 installed and i am using 20X camera as 2nd camera but i am unable to control the camera in D-sub 9 port for camera, cable length is 20 meter, is there any thing that i am missing?
Have a customer that migrated to a TMS15.3 from a a 14.5 server. but we had to rebuild the database from scratch. On the old system they were using the Movi clients to make video calls (it is a work around because they made the decision to do S4B) C...
Is there a way to backup just the TMSPE data from a 14.3 system and restore the users and schema templates to a 15.3 system?
LO , On a MX800 behind H323 gatekeeper & paired with an ISDN link , i cannot find how to autodetect wich protocol should be used. (H323/H320) When calling an ISDN/PSTN number, by default H323 is selected & call is dropped. Users must always select ...
I need to help to find Testing & Commissioning for Cisco system document example in low current project.
Hello team, I have 2 Nos of Sx20 and 3 Nos of Sx10 telepresence devices on different remote locaion. How can can i get Video Conferencing in these Five devices.Waht are the licenses needed.? What are advantage of cmr and webex ?? Kindly help....
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-08-2024 12:23 PM | ||
08-02-2024 05:48 AM | ||
08-01-2024 12:01 AM | ||
07-30-2024 03:24 PM | ||
07-29-2024 10:10 AM |