Transfering a call to a PRI

[orotter]

Can i get a call from a PBX to a Call manager IP Phone and do a transfer without wasting 2 Timeslots ?

I know it can be done with Qsig ( Does the call

manager supports that ? )

[#2]

From Cisco CallManager Version 3.3 onwards QSIG support is included:

See the document http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/3_3/rel_note/332cmrn.htm#1344646 for more information.

[orotter]

I ment for Explicit Call Transfer (ECT) feature

in PRI .

[acgarcia]

I'm trying to research this also. I read some docs that said this could be done on a PRI if you are setup for Network Side (NET5). The docs refered to Feature Group D support. Can anyone else chime in on this and shed some more light on this?

[orotter]

This is the answer :

http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_8/gtvc_etc.htm#wp997347