TX 9000 and escalation process

[chrischelvy]

Hi ,
I have a client with 4 TX 9000 and registered with cucm version 8.6.2. On the other hand they have a VCS where TP server registered as a SIP and H.323 .

This is more about the TX 9000 escalation process . Currently TX 9000 can' t escalate the conference to TP server. Basically if they are on a point to point call, they need to disconnect the call and need to call the " virtual meeting rooms" to bring more than 2 participants for that conference .

What is the best practice need to setup for the TX 9000 escalation process like multiway in the VCS world.

Do we need to have a SIP trunk to TP server instead registered with the VCS ? Then assign the media resource group for the cucm endpoints such as TX 9000.

Thanks

Chris




Sent from Cisco Technical Support iPhone App

[Marius Nedregaard]

Hi.

Multiway is not supported by CTS.

The best solution would be to set up a static meeting and dail into it whenever a multipoint conference is needed.

//Marius

[chrischelvy]

Thanks Marius.