cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2065
Views
5
Helpful
11
Replies

Upgrading VCS Control v7.2.2 to 8.1

Kiril Sharkov
Level 1
Level 1

Happy new year!

In the release notes of 8.1 I saw

"Before you upgrade to X8 or later,  if   you  are  using  TMS  Agent  (legacy  mode)  for   provisioning  you  must  first  migrate  to   Cisco TelePresence  Management  Suite  Provisioning  Extension"

In our VCS I have the alarm - " Configuration warning - The VCS is running in a legacy TMS Agent mode; you are recommended to switch your system to use a different mode"

I guess this VCS was previously used with a TMS, but now we don't have one.

How can I get rid of this alarm and upgrade the VCS to 8.1?

I found that this configuration is done from the FindMe config, but we do not have option key for FindMe now and it is not active.

I hope I explained the issue as clear as possible.

Best Regards,

Kiril