VCS-C and VCS-E register MOVI clients

[thorstenn]

Hi,

i don`t know if i`m right here.... It is possible to register MOVI clients on VCS-C / VCS-E Deployment without TMS Server? I have no Starter Pack.

How could i simply register the MOVI clients on VCS-C / VCS-E ?                  

Cheers

Thorsten

[Paulo Souza · Accepted solution]

Friend,

It is not possible to use jabber for Telepresence (Movi) without having TMS or VCS Starter Pack.

Jabber client must to be provisioned to work, it is not a common SIP client.

Regards

Paulo Souza

Sent from Samsung Mobile

[Jens Didriksen · Accepted solution]

As Paulo said, you can't, however, you could always use the Cisco hosted "free version" available here:

https://www.ciscojabbervideo.com/

this is identical to the "on-prem" version, however, you won't have features like presence and corporate directories and it is rate-limited to 1.3Mbps. It does work on PCs, Macs and iPad2 and later.

We use a combinatin of the two to keep licensing costs down to a more reasonable level, works fine.

/jens

(Please rate replies and mark question as "answered" if applicable.)