08-28-2012 11:58 PM - edited 03-17-2019 11:41 PM
someone can explain the vcs status on a cluster configuration?
my question is if the active state must be crossed between peers?, or there must be only one active vcs on the cluster?
please your help
ps: vcs version 7.1
peer 1 master:
peer 2
Thank you very much
Solved! Go to Solution.
08-29-2012 12:07 AM
Hi Cristian,
This looks ok. On the master it will show peer as active whice means the peer is reachable..and same way on peer it shows master as active which again same indication that its available.
if you reboot any server and then refresh the page..then it will show uknown or unreachanble or failed.
imprtant part is on the clustering status when you scroll down..it should show succeed and will show you next resync time as well.
Thanks
Alok
08-29-2012 12:05 AM
What you have is correct - green is good, and any red is bad.
one peer will always say "This VCS" - that's the box you are logged in on, and all the others in the list should show active - the active means that this peer can communicate with the one(s) showing up as active.
08-29-2012 12:07 AM
Hi Cristian,
This looks ok. On the master it will show peer as active whice means the peer is reachable..and same way on peer it shows master as active which again same indication that its available.
if you reboot any server and then refresh the page..then it will show uknown or unreachanble or failed.
imprtant part is on the clustering status when you scroll down..it should show succeed and will show you next resync time as well.
Thanks
Alok
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide