03-19-2014 04:42 AM - edited 03-18-2019 02:45 AM
Hi Folks
We are going to upgrade our VCS Control and Expressway on the software version to X7.2.2 from X6.0.When we go the cisco software download site we found that there are two software X7.2.2 with AES encryted and Non AES encrypted.What is the difference between them and how we can know from the VCS which software we need to download for X7.2.2.
Please let me know which software needs to be downloaded to have the system upgraded.
Regards
Tarun
03-19-2014 08:45 AM
Tarun,
software file s42700 is encrypted and s42701 is non-encrypted. please note from x8.1 there is only one software file available and i.e. encrypted software.
you can check your VCS is running encrypted or non-encrypted version under xstatus output.
SystemUnit:
Product: "TANDBERG VCS"
Uptime: 24221
SystemTime: "2014-02-08 06:26:06"
TimeZone: "Asia/Calcutta"
LocalTime: "2014-02-08 11:56:06"
Software:
Version: "X7.0.1"
Build: "266732"
Name: "s42700"
Regards
Alok
03-19-2014 09:19 AM
You can check in the VCS web interface as well, under Maintenance > Option Keys. Under active options, if you're running the encrypted VCS software, encryption will be present.
03-19-2014 04:49 PM
In addition to what Patrick and Alok have indicated - you can also see these pieces of information relatively easily on the web interface.
If you log in, you'll see, on the initial Overview Screen, the "Encryption" option showing as mentioned by Patrick.
If you click on Status > System > Information, you'll see the "s42700" or "s42701" as mentioned by Alok.
Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
Please remember to mark helpful responses and to set your question as answered if appropriate.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide