11-06-2002 12:59 AM - edited 03-17-2019 07:55 PM
what is the difference between VIC-2FXS and VIC-2FXO?
Can them just be used in WIC slots of cisco 2600?
thanks in advance
11-06-2002 07:33 AM
The difference between them is, one provides Dial tone (FXS) and one requires Dial tone (FXO).
In the simplest sense you connect a "regular phone" to the FXS card and a "phone line" to the FXO card.
To use them in the 2600 you need an NM-2V or NM-1V
11-07-2002 08:59 AM
The VIC-2FXS is a station device and can provide loopstart and ground start service to a analog phone device. It will give you dialtone.
The VIC-2FXO is a office card. IT is meant to provide a telco office type conenction. This is used to forward digits out to telphony networks. It will not give you dialtone. They cannot be used in a WIC slot of 2600, they can be used in a VIC slot. The 2600 would require a NM-2V, or NM-1V in order for these modules to work properly.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide