02-04-2006 01:00 PM - edited 03-17-2019 08:37 PM
Greetings
My customer requires the Video Conferencing between two of his sites those are connected via 512kpbs leased line circuit.
He donot want to involve the Desktop PCs for video conferencing. The solution should be something as if he just pick the phone and dial number to talk to other person.
Is there any solution available from Cisco or any other vendor in this regard?. The solution must be very easy in terms of Operations.
Regards
Mansoor Hafeez
02-04-2006 01:59 PM
If your customer is running Cisco CallManager then here is an option that meets their criteria
http://www.cisco.com/en/US/products/ps6564/index.html
Hope this helps
Please remember to rate all replies
02-04-2006 09:04 PM
My customer donot have CallManager. Is CallManager really required for such design?
02-05-2006 06:14 AM
For that design yes. Since you said he wanted it to be as simple as picking up the phone and calling someone to start a video conference.
Take a look here
http://www.cisco.com/en/US/netsol/ns340/ns394/ns158/ns280/netbr09186a00800f9218.html
for some other Cisco solutions but I don't think anything is going to be quite as simple as making a phone call but a few things should be very close.
Hope this helps.
Please remember to rate all replies
02-06-2006 03:11 PM
Check this link. It shows how set up H.323 based video p2p call
http://www.cisco.com/en/US/tech/tk1077/technologies_configuration_example09186a0080111c1b.shtml
03-09-2006 08:22 AM
Mansoor, you should be able to achieve the requirement by using any codec enpoint by running H323 and maybe setting up an address book on the device and point to far end. -Adam
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide