03-21-2017 12:22 AM - edited 03-18-2019 12:54 PM
We tested 3 way VC with 3 different VC room. We observed distortion in
03-22-2017 10:40 AM
Hi,
Which all are the 3 devices you tested ?
Are they in standalone mode on registered to CUCM / VCS ?
What was the bandwidth you used during the test call ?
03-23-2017 09:41 AM
If all of the devices are in the same switch and not connecting to some other device like an MCU you probably have a duplex mismatch. Make sure that both the switch port and the ethernet port on the device is set to the same thing - auto/auto or if one side is set to something specific like 100/full make sure the other is the same. If you have one set to auto and the other to 100/full the auto side will land at 100/half and you will get consistent packet loss.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide