Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
338
Views
0
Helpful
2
Replies

Voice Translation rule is too fast!

Go to solution
m.hofer
Level 1
Level 1

‎01-31-2005 05:27 PM - edited ‎03-17-2019 08:21 PM

The router doesn´t collect all incoming digits from the bri!

The command "ISDN overlap-receiver T302 is set to 5000"!

Is there any way to set the overlap-receiving timer or the time for collecting the incoming digits to a much higher value?

Thanx Martin

Labels:
0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
pacameron
Level 4
Level 4

‎02-01-2005 09:17 PM

Can you send the router config and the debug isdn q931 debugs ?

This sounds like you have a dial peer destination pattern that may be a close enough match for the incoming digits.

View solution in original post

0 Helpful
2 Replies 2

Go to solution
pacameron
Level 4
Level 4

‎02-01-2005 09:17 PM

Can you send the router config and the debug isdn q931 debugs ?

This sounds like you have a dial peer destination pattern that may be a close enough match for the incoming digits.

0 Helpful

Go to solution
m.hofer
Level 1
Level 1
In response to pacameron

‎02-19-2005 09:22 AM

Sorry for the delay! I solved the problem I did an IOS Upgrade to 12.3.11T.

Thank you for your help!

Regards Martin

0 Helpful
Customers Also Viewed These Support Documents