basic voip setup

[roshanverg]

my experiance with voip is very less

i have a requirement to suggest a basic VOIP soltion .

at present there are 4 analog phones connected to a pabx.  this system shoul be connected to a BASIC ip phone which will use by operator

what r the required equipments ?

what is the basic low cost ip phone which can use with this

how to do this

thanx

[paolo bevilacqua]

Adding a voip phone to an existing legacy system is not a good solution.

There is no integration among the two, and the complications an limitiations are more than the advantages.

[roshanverg]

hi

thanx

what is the lowest cost voip  solution which can replace legacy phones with cisco ip phones? 

Regards

Roshan

[paolo bevilacqua]

Cisco makes various products. You can engange a Cisco Reseller or browse online to get an idea of prices.

[Tod Larson]

The Cisco SB 300 might fit your needs.

http://www.cisco.com/cisco/web/solutions/small_business/products/voice_conferencing/uc_300_series/index.html

If you want to completely outsource it, look at www.ringcentral.com.

[paolo bevilacqua]

I would not advice the UC320. Read:

https://supportforums.cisco.com/message/3549610

In my experience with Cisco, telephones and other stuff is, buy cheap, buy twice.

[Nick Lichatz]

cme has some good features and can be cheap enough and still scale to meet your needs. With the addition of an sre module you can also add vmail and an aa. Cme supports most cisco phone and the cheapest being the 7911

Sent from Cisco Technical Support iPhone App