09-23-2014 04:02 AM - edited 03-18-2019 03:26 AM
Hello, I wonder if the card mentioned in the title would work with a 2951 GW for ISDN video reception through bonded E1 channels, for example to support a 384 Kbps videoconference. We always have used 3240 GWs for this so I am not completely sure that it will work. Assume that we have enough DSP resources.
Thanks in advance
10-06-2014 02:32 PM
It depends how complex your system configuration will be.
https://supportforums.cisco.com/discussion/11397801/isdn-video-calls-h320-bonding-over-isr-2911-pvdm-3
http://www.cisco.com/c/en/us/support/docs/voice/h323/72056-h320-h323-call-flow.html
I gave up since this makes only sence with a few systems. Install a 3241 and a few minutes later everything is up and running.
02-10-2015 01:07 AM
Thank you, we installed the 3241 to avoid problems
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide