Hi All,
I have a problem with a Cisco VCS control in my network. firstly i remark that the endpoint are not registered to thee VCS, i try to access to the VCS by web but i cannot ( i cannot ping it also).
I choose to connect to the VCS by Console but the only information that i can have are :
#############################################################
Phoenix - AwardBIOS v6.00PG
Copyright (C) 1984-2006, Phoenix Technologies, LTD
(G083-071)NSB-1083 Series BIOS V2.1
Main Processor : Intel(R) 2.80GHz(267x10.5) , 2 CPUs
Memory Testing : 4185024K OK+ 8M shared memory
Memory Frequency For DDR2 667 (Dual Channel Mode)
Detecting IDE drives ...
IDE Channel 2 Master : SMART Lite SATA Drive FER1.196
IDE Channel 3 Master : WDC WD2503ABYX-01WERA1 01.01S02
Press DEL to enter SETUP
06/23/2010-i965-ITE8712-G083-XXXC-00
#############################################################
ALso on the front screen there is nothing.
Please, could someone help to know what is the problem.
thanks in advance
regards
CHAM
