TelePresence and Video Infrastructure

Hello! At this moment in my company I have separated videoconference network on Polycom equipments/software (DMA 7000, RMX 4000) andseparated IP Telephony network on Cisco equipments/software (Cisco UCM 9.1.2).I want to integrate this two separeted n...

I need to migrate a TMS running 12.6 on a VM with Win2003 (SQL2005) to a new VM running Win2008 or Win2012.Initially I was thinking about upgrading the old server to the latest TMS v13.1 supported on Win2003 and then backup the db.But I've doubts if ...

We are successfully using MRA with Jabber and many EX90 endpoints.  We are using CUCM 10, a separate VCS-C/E (8.2) for MRA and all is working well but we have run into a bug.  My users that have EX90s connecting to UCM via MRA can do calls just fine ...

Can the Multisite license be "transferred' to another EP or is it tied (via S/N or MAC?) to the EP for which it was purchased? 

Hi All,I have a problem with a Cisco VCS control in my network. firstly i remark that the endpoint are not registered to thee VCS, i try to access to the VCS  by web but i cannot ( i cannot ping it also). I choose to connect to the VCS by Console but...

HiWe have Cisco CUCM 9.1.1 and video device as well as 9971 phones are registered with CUCM.We have VCS and VCSEVCS is integrated with CUCM via SIPWe can receive and make SIP video calls through internet. It is working fine.But some of the video call...

I am pleased to announce that TC7.1.4 is released and can be downloaded on http://www.cisco.com.Fixes bug CSCup25163 - Multiple Vulnerabilities in OpenSSL - June 2014Includes the following OpenSSL vulnerabilities identified by the Common Vulnerabilit...

Hello,We have a VCS-E server, endpoints are registered directly to it. Some endpoints are registered with SIP, some with H.323 protocol.When endpoint registered with SIP dials to 100@example.com then VCS-E initiates the call to sip:100@example.com. W...

Dear All Currently i have new project with Cisco Telepresence server , Conductor server , TMS , VCS-c 2 , VCS-E 2 , my Questions are the following below : - why i need Cisco Telepresence server ?- why i need Cisco Conductor server ? MCU can handle vi...

hello All,pls can NAT on a C40 codec registered on a VCSc allowoutbound calls without using the VCSe papa

Hello, I just found an issue with TMS 14.1.1, the case is whenever endpoint x, and endpoint y for example and in a point to point call, and there's a booked conference which is going to start, that has participant x, while x and y are currently in po...

Hi all,C40 software - various but last recorded issue TC6.3.1Calls are H.323 using the E.164 for dialling.We have noted a really odd issue with some of our C40's. These units are being dialled directly from an MCU (I believe a Codian 8510 - these are...