06-08-2018 07:41 PM - edited 03-18-2019 02:10 PM
Hi All,
We have a VCS-SPE x7.2.2 that is having some hardware fault, apparently we bought a new warranty replacement for it.
I received a new out of the box VCS x8.2.2. How do i convert from VCS to a VCS-SPE?
Also i need to port over the licenses from the old box to the new
My objective is basically to do a quick swap with existing config port over to new box
Appreciate any advise
06-11-2018 10:27 AM
Hi!,
You need an option key to convert a VCS to starter pack, once you do the licensing migration and install them it should convert to "Starter Pack"
06-11-2018 09:53 PM - edited 06-11-2018 09:56 PM
If you've received the replacement via an RMA, you can re-host the licences using the Cisco Licencing Portal. Once logged in, go to the Licences tab, then select "Rehost from failed device (RMA)" option.
If you're having troubles, you can reach out to the Cisco Global Licencing team by emailing licensing@cisco.com.
Please remember to mark helpful responses and to set your question as answered if appropriate.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide