08-23-2007 03:13 PM - edited 03-17-2019 09:07 PM
Hello,
We have a fax machine connected to an FXS port. Many times the fax machine port does not go down (Hang Up) after receiving or sending a fax. Therefore, users when they try to use the fax machine they don't a dial tone on the fax machine.
If we leave it for sometime like 15 minutes the port seems to hangup and users are able to use the fax machine again.
THis is an intermittent problem where sometimes the fax machine runs for a week without any problem.
Any ideas are highly appreicated,
Regards,
08-24-2007 08:00 AM
Anybody thinks it is an IOS Issue? I have found that the client is runnig a deffered release.
I hope the upgrade would solve the problem.
Regards,
12-19-2007 07:20 AM
My client is having a similar issue. The vg224 that my client has has the following IOS version:
vg224-16S-M version 12.3(4)XD
My question is, can i simply upgrade to the latest, like something in the 12.4 IOS??? Is there any issues from upgrading from 12.3 to 12.4??
Any suggestions?
12-29-2007 11:19 PM
I do faced problem with vg-224.I am running this image:
vg224-i6s-mz.123-4.XD.bin
Can you try with this.
-vishwesh
01-07-2008 08:47 AM
Hello,
I have upgraded the IOS on the router to a stable version. After the upgrade the problem disappeared.
Therefore, try to upgrade the VG IOS and check if this resolves the issue.
Hope this helps,
Regards,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide